FUJITSU CentricStor V3.1D - Manual (Page 146)

146 U41117-J-Z125-7-76
Function bar GXCC
6.2.2.2 Open
Opens a file selector window with which you can open a configuration that was generated
with “Save” (see above).
The window contains the field for entering the file name plus the following function keys:
OK Checks whether the specified file is a valid GXCC configuration file and, if so,
outputs its contents in graphical format and is displayed in Simulation mode. If
not, an error message is output.
You can only exit the simulation mode by terminating the GXCC
program.
Browse Opens a standard dialog box for searching for and selecting a file. The file type
is preset to *.gxd, and the file name is transferred to the entry field.
Instead of accepting the proposed file, you can click on any other .gxd file and
open it. If a .gxd file has been saved in a different directory then you can click
the button next to the directory bar to change to any higher-level and, therefore,
to any required directory.
Help Opens the GXCC help file.
Cancel Closes the window.
6.2.2.3 Show
Opens a file selector window for choosing a file which will then be displayed in the file
viewer.
6.2.2.4 Print
Prints a hardcopy of the main GXCC window excluding the “Print” menu. The print dialog
box is described in the
section “File” on page 299 . In Windows systems the “Print” function
button must be used to create a hardcopy.
i