FUJITSU CentricStor V3.1D - Manual (Page 455)

U41117-J-Z125-7-76 455
Explanation of console messages Message lines
Temporary unavailability of the FC
The following message complex, with LOOP-DOWN, rescheduling and LINK-UP
messages, is output:
SXFP041 fcpal<n> (sadm<k>): rescheduling after temporarily unavailable resource
None
SXFP041
fcpal<n> (sadm<k>): rescheduling on intr : unavailable resource
None
SXFP041
fcpal<n> (sadm<k>): skipping timer processing
None
Meaning
The FC configuration is being changed. Devices like PCs or RAID disk arrays are currently
being removed or added, or cables are being plugged in/removed.
Response
None if this state is temporary. However, after approximately 1 minute things should return
to normal. If this is not the case, notify maintenance staff.
9.2.8 SXFW... (Firmware)
SXFW001 Firmware update for device mbk<xxx> timed out, device not responding.
ALERT
Meaning
Loading of the firmware could not be completed within a particular time.
Response
Notify maintenance staff.
SXFW002 Firmware update for device mbk<xxx> failed.
ALERT
Meaning
Loading of the firmware could not be completed successfully.
Response
Notify maintenance staff.