FUJITSU CentricStor V3.1D - Manual (Page 345)

U41117-J-Z125-7-76 345
XTCC Function bar
If you require individual profile settings, you should define separate profile settings. The
profile data is saved in a matrix format: A directory is set up for each profile name, including
“default”.
Profile data is stored in this directory for each unit under the name <system_name>.opt.
When changing unit, the current settings are saved under the old unit name. The directory
is then searched to determine whether there is already data for the new unit. If this is the
case, this data is used for control purposes, with the exception of any predefined command
line arguments mentioned above. Otherwise the existing settings are adopted, and these
will be saved when the system is terminated or when the unit is changed again.
Directory: default.prf Name1.prf Name2.prf Name3.prf
CentricStor A CentricStor_A.opt CentricStor_A.opt CentricStor_A.opt CentricStor_A.opt
CentricStor B CentricStor_B.opt CentricStor_B.opt CentricStor_B.opt CentricStor_B.opt
CentricStor C CentricStor_C.opt CentricStor_C.opt CentricStor_C.opt CentricStor_C.opt
CentricStor D CentricStor_D.opt CentricStor_D.opt CentricStor_D.opt CentricStor_D.opt