FUJITSU CentricStor V3.1D - Manual (Page 527)

U41117-J-Z125-7-76 527
Explanation of console messages Message lines
SXVW020 VLPWATCH: ALERT: VW(#020) AutoVLP-Failover: VLPwatch is started first on SVLP
Meaning
The VLPwatch monitoring wizard was started on the SVLP first. This is not permissible.
(Can only be done in the case of manual activation.)
Response
Restart the AutoVLP failover function via the interface.
SXVW021 VLPWATCH: ALERT: VW(#021) AutoVLP-Failover: check of /etc/vfstab failed
Meaning
Incorrect configuration of the caches and DB.
Response
Check the configuration of the caches and the DB and correct it for the VLP and SVLP.
SXVW022 VLPWATCH: ALERT: VW(#022) AutoVLP-Failover: Type of /etc/vfstab is SVLP but my
type in communication sector is VLP.
Meaning
The ISP is configured as an SVLP but is entered as a VLP in the AutoVLP communication
sector.
Response
An additional message is always output with this message. The response specified there
must be implemented.
SXVW023 VLPWATCH: ALERT: VW(#023) AutoVLP-Failover: connection to LAN and start of
CentricStor prevented!.
SXVW023 VLPWATCH: ALERT: VW(#023) AutoVLP-Failover: please reconfigure this function!.
Meaning
The ISP is placed in Disconnect mode. No connection to: LAN, cache and DB.
Response
The function must be deconfigured manually and disconnect mode must be canceled.
Check and correct the configuration of the VLP and SVLP. Depending on the analysis, the
ISP must then be rebooted or the vtls started.
SXVW024 VLPWATCH: NOTICE: VW(#024) correct CS Site
Meaning
The master VLP is on the correct CentricStor site.
SXVW025 VLPWATCH: ERROR: VW(#025) no correct CS Site
Meaning
The master VLP is not on the correct CentricStor site