FUJITSU CentricStor V3.1D - Manual (Page 375)

U41117-J-Z125-7-76 375
XTCC ISP
8.6.2.6 Show System Log
Displays system messages from the file klog.msg:
8.6.2.7 Show SNMP Data
This function is only available if a flashing yellow “SNMP” symbol indicates that one or more
SNMP data blocks are available. It opens a submenu in which you can select a block for
display. This is then removed from the submenu.
8.6.2.8 Clean File System
This function is not available in Observe mode.
This function is only available if a yellow or flashing red tool symbol indicates that the file
system occupancy level is greater than 95% or is at 100% (“File System full”).
The function starts a program which cleans the file systems of superfluous files. The
program deletes files that are contained in a list which can be modified by the service staff.
It also searches for temporary files that are less than 24 hours old and that occupy more
than 5 Mbytes of storage space. A message box will then appear telling you which files have
been located and how much space this now makes available. You must acknowledge this
message.
If this call does not solve the problem, you must notify your service staff. The majority of
software problems result in large volumes of diagnosis data being saved which, in turn, fills
the file system.