Festo Контроллеры двигателя SFC-LAC - Manual (Page 120)

5. Commissioning
5−24
Festo P.BE−GDCP−SFC−LACI−PB−E N en 0812NH
5.3.2 Procedure
Starting the FCT
1. Connect the SFC−LACI to your PC via the parametrising
interface (RS232) } section 3.5.
2. Start the FCT:
Double click on the FCT icon on the desktop
ć or ć
Switch to Windows and select the entry [FestoĂSoftware]
[Festo Configuration Tool] in the menu [Start].
3. Create a project in the FCT or open an existing project.
Add a device to the project with the SFC−LAC PlugIn.
Instructions on parametrising and commissioning
FCT framework Information on working with projects and on inserting a
device in a project can be found in the help for the FCT
framework with the command [Help] [Contents FCT general].
PlugIn SFC−LAC The SFC−LAC PlugIn for the FCT supports all the steps
necessary for commissioning an SFC−LACI. The necessary
parameterisation can be executed offline, i.e. without the
SFC−LACI being connected to the PC. This enables preparation
for the actual commissioning, e.g. in the design office when a
new system is planned.
Further information can be found in the plug−in help:
Command [Help] [Contents of installed PlugIns]
[FestoĂ(manufacturer name)ā] [SFC−LAC (PlugIn name)ā].