Festo Контроллеры двигателя SFC-LAC - Manual (Page 313)

B. Supplementary information
B−93
Festo P.BE−GDCP−SFC−LACI−PB−E N en 0812NH
B.4.3 Access via a terminal program
For data transmission you will require a commercially−
available terminal program or the integrated CI terminal of
the SFC−LAC PlugIn in the Festo Configuration Tool.
1. Connect the SFC−LACI to your PC (see section 3.5).
2. Configure your PC’s COM interface:
Settings of the COM interface
Transmission speed (baud rate) 38400 Baud
Data format Asynchronous character frame:
Ĉ 1 start bit
Ĉ 8 data bits
Ĉ no parity bit
Ĉ 1 stop bit
Tab. B/13: Settings of the COM interface
3. You can use the following command to initialise data
transmission and determine the SFC−LACI’s response
readiness:
Command Reply
1 <CR> 11 <CR>