Festo Контроллеры двигателя SFC-LAC - Manual (Page 47)

2. Fitting
2−3
Festo P.BE−GDCP−SFC−LACI−PB−E N en 0812NH
2.1 General Information
Caution
Uncontrolled drive motion may cause personal injury and
material damage.
· Before carrying out fitting, installation and/or maintenĆ
ance work, always switch off the power supply.
Caution
If a drive is mounted in a sloping or vertical position, loads
may fall down and cause injury to persons.
· Check whether external safety measures are necessary
(e.g.Ătoothed latches or moveable bolts).
This prevents the work load sliding down suddenly if there
is a power failure.
Please also note the following documentation:
ć Operating instructions for the drive,
(e.g.ĂDNCE−...−LAS)
ć Instructions for the additional components
(e.g.Ăthe fitting instructions for the cables).