Black Box COMPACT T1 MT850A - Manual (Page 106)

5-22 Compact T1 - Release 6.1
CLI Commands
add
{dest-ip-addr/bits}
The destination IP Address and number of significant bits. The IP Address is in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255. The address "0.0.0.0/0" matches any
address.
{src-ip-addr/bits}
The destination IP address and number of significant bits. The address "0.0.0.0/0" matches
any address.
dest-ip-addr Enter the IP Address of the local device or network that this rule will
affect. If you enter the address of a local device, this rule will affect
only the session establishments of the local device and the
destination address entered in the Remote IP Address/Network field,
below. The IP Address is in the form of xxx.xxx.xxx.xxx, where xxx
is between 0-255.
bits Use this field to identify the number of bits, from left to right that
will be used to match the IP Address field within the data packet.
Range is between 1-32.
src-ip-addr Enter the IP Address of the local device or network that this rule will
affect. If you enter the address of a local device, this rule will affect
only the session establishments of the local device and the
destination address entered in the dest-ip-addr/bits command above.
The IP Address is in the form of xxx.xxx.xxx.xxx, where xxx is
between 0-255.
bits Use this field to identify the number of bits, from left to right that
will be used to match the IP Address field within the data packet.
Range is between 1-32.