Black Box COMPACT T1 MT850A - Manual (Page 292)

5-208 Compact T1 - Release 6.1
CLI Commands
show
show autoexit
Use the show autoexit to display whether autoexit is on or off. If on, the time-out period is
displayed.
Syntax: show autoexit
Example: show autoexit
> show autoexit
Autoexit is off.
show (bri)
Use the show (bri) to display settings for BRIs.
Syntax: show {bri-addr}
Example: show 3:1
The example will display the settings for port 1 (BRI) on slot 3.
> show 3:1
SLOT 3:
Settings for BRI Port 1:
Mode: LT4TO1TDM
Up/Down: UP
CRV: 31
Performance Sync Source: ADIT
Auto Activate: OFF
Performance Threshold Settings 1 hour 1 day
------ ------
errored seconds: 40 100
severely errored seconds: 10 25
{bri-addr}
The BRI address is in the form {slot:port}. Where {slot} displays connections for an entire
slot, {slot:port} for a port within a given slot.
slot Slot number (1-6) where the BRI card is located
port Port number, range or all.