Black Box COMPACT T1 MT850A - Manual (Page 222)

5-138 Compact T1 - Release 6.1
CLI Commands
set
set (router) snmp name
Use the set (router) snmp name command to set the value of sysName on the specified
Router card.
Syntax: set {rtr_card-addr} snmp name {"system-name"}
Example: set 1 snmp name "AditRouters"
The example will set the value of sysName on the Router card in slot 1 to
"AditRouters".
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"system-name"}
The value of sysName, with a maximum of 64 ASCII characters. Name must be enclosed
in quotes.