Black Box COMPACT T1 MT850A - Manual (Page 352)

5-268 Compact T1 - Release 6.1
CLI Commands
status
status (router) events
Use the status (router) events command to display the current event log from the specified
Router card.
Syntax: status {rtr_card-addr} events
Example: status 5 events
ROUTER BLADE EVENTS LOG REPORT Slot-5
Time Message Count
Jan 10 0:56:44.8 Download EVE.RPT by Controller
Jan 10 0:54:27.4 Download complete in 0.0 secs [17440 bps]
Jan 10 0:54:27.4 Download ALM.RPT by Controller
Jan 10 0:14:23.5 ADMIN login terminated
Jan 10 0:14:21.8 Download complete in 0.1 secs [61600 bps]
Jan 10 0:14:21.7 Download config.cfg by Controller
Jan 10 0:14:21.6 Send CFG Change Notice to Controller - PASS
Jan 10 0:14:20.7 NVRAM Flash Task Wakeup Event Sent
Jan 10 0:10:56.5 Login accepted at ADMIN level
Jan 10 0:03:29.9 ADMIN login terminated
Jan 10 0:03:28.5 Download complete in 0.1 secs [60880 bps]
Jan 10 0:03:28.4 Download config.cfg by Controller
Jan 10 0:03:28.3 Send CFG Change Notice to Controller - PASS
Jan 10 0:03:27.4 NVRAM Flash Task Wakeup Event Sent
Jan 10 0:02:48.7 Login accepted at ADMIN level
Jan 9 23:29:34.5 Download complete in 0.1 secs [60160 bps]
Jan 9 23:29:34.3 Download config.cfg by Controller
Jan 9 23:29:34.3 Send CFG Change Notice to Controller - PASS
Jan 9 23:29:33.4 NVRAM Flash Task Wakeup Event Sent
Jan 9 23:28:35.7 Download complete in 0.1 secs [60000 bps]
Jan 9 23:28:35.5 Download config.cfg by Controller
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.