Black Box COMPACT T1 MT850A - Manual (Page 356)

5-272 Compact T1 - Release 6.1
CLI Commands
status
status (router) ipx server table
Use the status (router) ipx server table command to display the current table of learned IPX
Servers for the specified interface on the Router card.
Syntax: status {rtr_card-addr} ipx server table
["profile-name"]
Example: status 4 ipx server table
> status 4 ipx server table
ROUTER BLADE IPX SERVERS REPORT Slot-4
Total Entries-0 on 0 Ports
Display: <IPX Servers > Learned From: <All Ports >
Network Hops Type Name Port Name Frame Type
No Records to Display...
Example: status 5 ipx server table "Adit50"
> status 5 ipx server table "Adit50"
ROUTER BLADE IPX SERVERS REPORT Slot-5
Total Entries-0 on Local LAN
Display: <IPX Servers > Learned From: <Local LAN >
Network Hops Type Name Frame Type
No Records to Display...
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
["profile-name"]
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.