Show (router-lan) collision, Show (router-lan) collision -233 – Black Box COMPACT T1 MT850A User Manual
Page 317
Compact T1 - Release 6.1
5-233
CLI Commands
show
show (router-lan) collision
The show (router-lan) collision command displays the current LAN collision alarm settings
for the specified Router card.
Syntax:
show {rtr-addr} collision
Example:
show 5 "Adit50" collision
> show 5 "Adit50" collision
SLOT 5:
LAN Collision Threshold Settings for Adit50:
Sample Interval: 15
Collision High Threshold: 500
Collision Low Threshold: 10
{rtr-addr}
The Router (IP or CMG) address is in the form {slot:port} or {slot "profile-name"}.
slot
Slot number (1-6) that contains the Router card.
port
Port number of the Router is 1.
"profile-name"
The profile name for the Router interface that is used to reach this
destination. Name must be enclosed in quotes, with a maximum
length of 11 characters.