Status (ds1), Status (ds1) -257 – Black Box COMPACT T1 MT850A User Manual
Page 341
Advertising
Compact T1 - Release 6.1
5-257
CLI Commands
status
status (ds1)
Use the status (ds1) command to display the current status of the specified DS1.
Syntax:
status {ds1-addr} [performance] [history]
Where you can either specify a {slot:port} address to display an individual port
or range of ports.
Example:
> status a:1
SLOT A:
Status for DS1 1:
Receive: Traffic
Transmit: Traffic
Loopback: OFF
{ds1-addr}
In the form of {slot:port}.
[performance]
Display current performance statistics for the specified port or ports.
[history]
Display historical performance statistics for the specified port or ports.
slot
A for the controller card, or 1-6 for service cards.
port
Port number or range.
Advertising