Black Box COMPACT T1 MT850A - Manual (Page 466)

13-10 Compact T1 - Release 6.1
Router (IP) Card
Card Configuration
l delete (router-wan) gre network
Remove a "by network" GRE tunnel to a WAN.
l delete (router-wan) nat bypass
Delete an IP subnet or host from the list of source addresses that will not be
subject to NAT translation when passing through a NAT enabled WAN
interface.
l delete (router-wan) static
Remove a static element from the WAN interface (IP address, IP network,
IP network, MAC address).
l disconnect {slot:port:trunk}
Removes a connection created by the connect {trunk-addr}{t1-addr}
l install (slot) router
Will prepare the controller for the insertion of a new router card that will
keep its currently loaded configuration.
l load tftp
Will download software via TFTP to the Controller or the Router card.
l rename (router) (router-wan/lan)
Change the name of a remote WAN or local LAN profile on the Router card.
l reset (router)
Reboot the Router. All new configuration will be in-use.
l rtrping
Router will perform a ping test and report the result.
l set (router) autologout
Set the period of time on inactivity after which the user will be automatically
logged-out of a Telnet session
l set (router) default
Reset the Router card to its default configuration settings.
l
set (router) dhcp
Disable both DHCP server and DHCP relay functionality for the Router.
l set (router) dns
Configure the Domain Name Server (DNS) options.
l set (router) enhanced security
Enable/disable enhanced login security on the Router