Status ipds0, Status (ocudp), Status ipds0 -262 – Black Box COMPACT T1 MT850A User Manual
Page 346: Status (ocudp) -262
5-262
Compact T1 - Release 6.1
CLI Commands
status
status ipds0
Use the status ipds0 command to display the current status of the DS0 management channel.
Syntax:
status ipds0
Example:
status ipds0
> status ipds0
Operational state: DOWN
status (ocudp)
Use the status (ocudp) command to displaystatus for selftest and loopbacks.
Syntax:
status {ocudp-addr}
Example:
status 2:1
SLOT 2:
Status for OCUDP Port 1:
Selftest:
Results as of 23:25:48 01/07/2001
Datapath: PASS
FPGA: PASS
OCU: PASS
OCU Manual Loopback: NONE
CSU Manual Loopback: NONE
OCU NonLatching Loopback: NONE
DSU NonLatching Loopback: NONE
CSU NonLatching Loopback: NONE
OCU Latching Loopback: NONE
DSU Latching Loopback: NONE
CSU Latching Loopback: NONE
{ocudp-addr}
The {slot:port} address of the OCU-DP card to display.
slot
Slot number (1-6) where the OCU-DP is located
port
Port number or range.