Black Box COMPACT T1 MT850A - Manual (Page 469)

Compact T1 - Release 6.1 13-13
Router (IP) Card
Card Configuration
l set (router-wan) ip address
Set the IP address for a WAN interface.
l set (router-wan) ipx
Set the IPX traffic handling on the specified WAN interface.
l
set (router-wan) nat
Configure Network Address Translation (NAT) on a specified WAN
interface.
l set (router-wan) other
Set traffic handling of protocols other than IP or IPX on the specified WAN
interface.
l set (router-wan) ppp
Configure PPP on the specified Router card.
l
set (router-wan) rip
Set the type or RIP updates on the WAN interface.
l set (router-wan) stp
Configure the Spanning Tree Protocol on the WAN interface.
l set (router-wan) trunk
Configure the trunk port for a specified WAN interface.
l set (router-wan) up/down
Set the specified WAN interface up or down.
l show (router)
Displays the current Router settings (DHCP, DNS proxy, LMI, PPP, RIP,
SNMP, STP, syslog and uploaduser).
l show (router) dhcp
Displays the current DHCP settings for the Router
l show (router) dns
Displays the current DNS setup for the router card
l show (router) dns proxy
Displays the current DNS Proxy setup for the router card
l show (router) lmi
Displays the current Local Management Interface (LMI) settings
l show (router) ntp
Displays the settings for NTP options