Black Box COMPACT T1 MT850A - Manual (Page 66)

4-4 Compact T1 - Release 6.1
Configuration
Basic System Setup
Basic System Setup
Following is a quick reference to some of the common tasks in configuring the
Unit.
Initial Setup
Use the following commands for your initial setup, for further information see the
specific command listed in Chapter 5, CLI Commands .
Command Description
set local off Disables DIP switches.
set date {mm/dd/yyyy} Set the date used for event logging
set time {hh:mm:ss} Set the time used for event logging
set id {"id-name"} Set a system ID name
set clock1 {slot:port}
internal
Set the primary clock source
set clock2 {slot:port}
internal
Set the secondary clock source
set ethernet ip address
{ip-addr} {mask}
Set the ethernet IP address, in the
conventional IP address format
set ip gateway {ip-addr} Set the IP gateway, in the conventional IP
address format