Establish a static channel connection, Set up a isdn bri service – Black Box COMPACT T1 MT850A User Manual

Page 70

Advertising
background image

4-8

Compact T1 - Release 6.1

Configuration

Basic System Setup

Establish a Static Channel Connection

Use the following commands to establish a static channel connection.

Set Up a ISDN BRI Service

Use the following commands to set up a ISDN BRI Service. See the set (bri) command
for details.

Command

Description

set {slot:port:channel} type

{voice|data}

Set the channel type for the channel you
want to map. See set (ds0) command for
details

set {slot:port:channel} signal

{emdw|emi|emicpd|emw|gs|ls|pl

ar|r2}

Set the signaling option for the channel you
want to map. See set (ds0) command for
details

connect {slot:port}

{slot:port}

Connect the channels. See the show connect
command for details

Command

Description

set {slot:port} up

Put the ISDN line In-Service

set {slot} mode

{lt3ds0|lt4to1tdm|nt3ds0}

Set the ISDN mode

set {slot:port} crv {1-768}

Set the Call Reference Value.

set {slot:port} threshold

{day|hour} {es|ses}

Set the threshold for the IDSN lines

set {slot} pmsync

{adit|switch}

Set the source for performance monitoring
synchronization

set {slot:port} autoactivate

{on|off}

Only used in 4 to 1 mode. Establishes the D
channel when the FDL link can not be used

Advertising