Snmp trap reports, Standard traps – Black Box COMPACT T1 MT850A User Manual
Page 526
![background image](/manuals/53231/526/background.png)
A-8
Compact T1 - Release 6.0
SNMP Interface
SNMP Trap Reports
SNMP Trap Reports
The Commpact T1 can send the following SNMP trap reports.
Standard Traps
Trap
Description
Test Method
authenticationFailure
Occurs when a bad community string is
used.
Attempt a Get or Set
using an invalid
community string.
linkDown
Sent when a DS1 changes from an up (in-
service) state to a down (out-of-service)
state. It is not sent when a DS1 is set
“down” by a manual command.
Also sent when a DS1 is set up manually, if
it is in an out-of-service state.
Disconnect an in-service
DS1.
linkUp
Sent when a DS1 changes from a down
(out-of-service) state to an up (in-service)
state. It is not sent when a DS1 is set “up”
by a manual command.
Connect a DS1 and put it
into service.
coldStart
Sent whenever the SNMP agent is restarted
as a result of a software reset or unit power-
up.
Cycle the power off and
on.