Status (router-trunk), Status (router-trunk) -279 – Black Box COMPACT T1 MT850A User Manual
Page 363
Advertising
Compact T1 - Release 6.1
5-279
CLI Commands
status
status (router-trunk)
Use the status (router-trunk) command to display the current status information for the
specified Trunk on the Router card.
Syntax:
status {rtr_trunk-addr}
Example:
status 5:1:1-4
> status 5:1:1-4
SLOT 5:
Status for RTR 1 Trunk 1:
Link Alarm: NO
SLOT 5:
Status for RTR 1 Trunk 2:
Link Alarm: NO
SLOT 5:
Status for RTR 1 Trunk 3:
Link Alarm: NO
SLOT 5:
Status for RTR 1 Trunk 4:
Link Alarm: NO
{rtr_trunk-addr}
The Router (IP or CMG) trunk address is in the form {slot:port:trunk}.
slot
The slot number (1-6) that contains the Router card.
port
Port number.
trunk
Trunk number, a range or "all" can be used here. Port numbers are 1-24.
Advertising