Black Box COMPACT T1 MT850A - Manual (Page 349)

Compact T1 - Release 6.1 5-265
CLI Commands
status
status (router)
Use the status (router) command to display the current Router status information.
Syntax: status {rtr-addr}
Example: status 5:1
The example displays status of the Router card in slot 5.
SLOT 5:
Status for RTR Port 1:
Run Status: Running
Collision Alarm: NO
Link Alarm: NO
Alarm LED: Red
10/100 LED: Off
Link LED: Off
Collision LED: Off
Transmit LED: Off
Receive LED: Off
{rtr-addr}
The Router (IP or CMG) address is in the form {slot:port}.
status (router) alarms
Use the status (router) alarms command to display the current alarm log from the specified
Router card.
Syntax: status {rtr_card-addr} alarms
Example: status 5 alarms
ROUTER BLADE ALARM LOG REPORT Slot-5
Time Message Count
Jan 4 22:26:47.0 Ethernet Link 5:1 Down.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
slot Slot number (1-6) that contains the Router card.
port Port number of the Router is 1.