Black Box COMPACT T1 MT850A - Manual (Page 318)

5-234 Compact T1 - Release 6.1
CLI Commands
show
show (router-lan) filter
The show (router-lan) filter command displays the current LAN Layer 2 data filters applied to
the LAN on the specified Router card.
Syntax: show {rtr-addr} filter [address|all|custom|protocol]
Example: show 5:1 filter
> show 5:1 filter
SLOT 5:
LAN Filters Enabled for Adit50:
Forward Mode: Forward ALL Frames NOT Matching Filters
Filter Type Source/Dest Filter Name
----------- ----------- -----------
Protocol XNSrule
Protocol XNSrule
Total: 2
Example: show 5:1 filter all
> show 5:1 filter all
SLOT 5:
LAN MAC Address Filters Defined for Adit50:
Total: 0
LAN Protocol Filters Defined for Adit50:
Protocol Name Ethernet Value IEEE Value
------------- -------------- ----------
SPANTRE 0 42
XNSrule 807 0
XNSrule 807 0
Total: 3
LAN Custom Filters Enabled Defined for Adit50:
Total: 0