Black Box COMPACT T1 MT850A - Manual (Page 95)

Compact T1 - Release 6.1 5-11
CLI Commands
add
add (router) uploaduser
Use the add (router) uploaduser command to specify a host that is allowed to upload either
the configuration or software files to the specified Router card.
Syntax: add {rtr_card-addr} uploaduser {both|code|config}
{all|ip-addr} {"profile-name"}
Example: add 3 uploaduser code all "LosAngeles"
The example will allow any user to upload the code file from the Router
interface named "LosAngeles". The Router is located in slot 3.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{both|code|config}
{all|ip-addr}
{"profile-name"}
The name of the remote WAN or LAN profile that can be used for the upload. This name
must be enclosed in quotes.
both Will allow user to upload both the code file and the configuration file
from the Router
code Will allow user to upload the code file from the Router
config Will allow user to upload the configuration file from the Router
all Will allow upload from anywhere
ip-addr The IP address to allow upload boot from. In the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255