Black Box COMPACT T1 MT850A - Manual (Page 366)

5-282 Compact T1 - Release 6.1
CLI Commands
status
status (v35)
Use the status (v35) to display the current near-end line status of the V.35 card.
Syntax: status {v35-addr}
Example: status 2:1
The example displays status of port 1 (V.35) on slot 2
> status 2:1
SLOT 2:
Status for V35 PORT 1:
DCD: Low
CTS Low
DSR: Low
RTS: Low
DTR: Low
{v35-addr}
In the form of {slot|slot:port}.
Display Descriptions
DCD - Data Carrier Detect indicates port is receiving a carrier signal
CTS - Clear to Send indicates port is ready to receive data
DSR - Data Set Ready indicates port is ready to send data
RTS - Request to Send
DTR - Data Terminal Ready
slot The slot number (1-6) that contains the V.35 card
port Port number or range.