Black Box COMPACT T1 MT850A - Manual (Page 353)

Compact T1 - Release 6.1 5-269
CLI Commands
status
status (router) ip address table
Use the status (router) ip address table command to display the current IP address table for
the specified Router card.
Syntax: status {rtr_card-addr} ip address table
["profile-name"]
Example: status 5 ip address table
> status 5 ip address table
ROUTER BLADE IP ADDRESSES REPORT Slot-5
Adit50 has learned 2 IP Addresses from 1 Port.
Display: <IP Address > Learned From: <All Ports >
Port Name IP Address MAC Address
1. Local LAN Static 120.0.0.10
2. Local LAN Direct 192.168.3.196 00E09701E574
Example: status 5 ip address table "Adit50"
> status 5 ip address table "Adit50"
ROUTER BLADE IP ADDRESSES REPORT Slot-5
Adit50 has learned 2 IP Addresses
Display: <IP Address > Learned From: <Local LAN >
IP Address MAC Address
1. Static 120.0.0.10
2. Direct 192.168.3.196 00E09701E574
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
["profile-name"]
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.