Black Box COMPACT T1 MT850A - Manual (Page 118)

5-34 Compact T1 - Release 6.1
CLI Commands
clear
clear (router) mac address table
Use the clear (router) mac address table command to flush the learned entries from the MAC
address table for the specified interface from the specified Router card.
Syntax: clear {rtr_card-addr} mac address table
["profile-name"]
Example: clear 2 mac address table "LosAngeles"
The example will clear all the entries on the "LosAngeles" interface, MAC
address table.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
["profile-name"]
The name for the Router interface profile. This name must be enclosed in quotes, with a
maximum of 11 characters.
Note: the profile-name is optional, if not specified the tables for all interfaces will be
cleared.
clear (router) mgcp stats
Use the clear (router) mgcp stats command to set all MGCP (Media Gateway Call Protocol)
statistic counts to zero on the CMG card. This command applies to the CMG Router card only.
Syntax: clear {cmg_card-addr} mgcp stats
Example: clear 2 mgcp stats
The example will set all MGCP statistics counts to zero, on the CMG in slot 2.
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.