Show (router), Show (router) -218, Cli commands – Black Box COMPACT T1 MT850A User Manual
Page 302
![background image](/manuals/53231/302/background.png)
5-218
Compact T1 - Release 6.1
CLI Commands
show
show (router)
The show (router) command displays the settings for the Router card.
Syntax:
show {rtr_card-addr}
Example:
show 5
> show 5
SLOT 5:
Login Settings for Router:
Authentication: Local
Login Prompt: Enabled
LMI Settings for Router:
LMI: Disabled
RIP Setting for Router:
RIP Mode Receive: RIP1
RIP Mode Send: RIP1
PPP Authentication/Security Settings for Router:
Authentication by Remote:
Protocol: None
User ID: Local Profile Name
Authentication of Remote:
Protocol: None
Local Security Server:
Type: None
PPP Statistics for Slot-5:
Up/Down Rx Rx Tx Tx
Remote Name State Time Packets Octets Packets Octets
RemoteAdit DOWN 1h27m16s 0 0 0 0
SNMP Settings for Router:
SNMP Communities:
Name Address Access
public 0.0.0.0 Read