Black Box COMPACT T1 MT850A - Manual (Page 467)

Compact T1 - Release 6.1 13-11
Router (IP) Card
Card Configuration
l set (router) lmi
Specify the Local Management Interface (LMI) protocol to use for the
Router.
l set (router) log
Set password access on the Router card (access level, password)
l set (router) login auth
Sets how login authentication for this router should be performed
l set (router) login prompt
Enable/disable the suppression of the Router login prompt for a user that
telnets in from the Controller CLI
l set (router) ntp
Set Network Time Protocol (NTP) parameters
l
set (router) password
Manage password access on the specified Router card
l set (router) ppp auth
Set the PPP authentication on the specified Router card
l set (router) ppp security
Set up the local external security server which the Router card will use to
authenticate remote PPP devices
l
set (router) proxy
Configures Router in-use basics (up, down and proxy).
l
set (router) reboot
Set automatic reboot after an upload of code or configuration file.
l set (router) rip
Specify version of RIP packets to transmit and receive.
l set (router) snmp
Set the value of sysContact, sysLocation and sysName on the Router.
l set (router) stp
Setup the Spanning Tree Protocol on the Router.
l set (router) syslog
Configure the Router to send alarm and event messages to a Syslog server
l set (router-lan) collision
Set the collision alarms (interval and threshold).