Black Box COMPACT T1 MT850A - Manual (Page 311)

Compact T1 - Release 6.1 5-227
CLI Commands
show
show (router) rip
The show (router) rip command displays the current RIP settings for the Router card.
Syntax: show {rtr_card-addr} rip
Example: show 5 rip
> show 5 rip
SLOT 5:
RIP Settings for Router:
RIP Mode Receive: RIP2
RIP Mode Send: Rip2
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
show (router) snmp
The show (router) snmp command displays the current SNMP settings for the specified Router
card.
Syntax: show {rtr_card-addr} snmp
Example: show 5 snmp
> show 5 snmp
SLOT 5:
SNMP Settings for Router:
SNMP Communities:
Name Address Access
public 0.0.0.0 Read
SNMP Trap Destinations:
Name Address Location
public 0.0.0.0 Local LAN
Statistics Averaging Interval: 1 min.
Name: unknown
Contact: unknown
Location: unknown
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.