Black Box COMPACT T1 MT850A - Manual (Page 297)

Compact T1 - Release 6.1 5-213
CLI Commands
show
show (fxs5G)
The show (fxs5G) command displays the settings for the FXS 5G card.
Syntax: show {fxs5G-addr}
Example: show 6:1
This command will display the settings for the FXS channel 1 for the FXS 5G
card located in Slot 6.
> show 6:1
SLOT 6:
Settings for FXS: channel 1:
Type: VOICE
Signaling: LS
RxGain: -6 dB
TxGain: -3 dB
Impedance: 900 Ohms + 2.16uF
Example: show 4:1
SLOT 4:
Settings for FXS: channel 1:
Type: VOICE
Signaling: GSW
RxGain: -6 dB
TxGain: -3 dB
Impedance: 900 Ohms + 2.16uF
Wink time: 135 ms
Note: Wink time displays only when signaling is set to GSW or GSWRB.
{fxs5G-addr}
In the form of {slot} or {slot:port}. Note if only slot is listed, all ports will be displayed.
slot Location of the FXS 5G card, slot 1 - 6
port Port number, range or "all".