Black Box COMPACT T1 MT850A - Manual (Page 262)

5-178 Compact T1 - Release 6.1
CLI Commands
set
set (router-voice) rxgain
Use the set (router-voice) rxgain command to set gain on the receive side (packet-to-TDM)
voice path for the specified voice channel(s). This gain setting can be overridden by the call
agent on a call-by-call basis. This command applies to the CMG Router card only.
Syntax: set {cmg_voice-addr} rxgain {gain}
Example: set 2:1:1:10 rxgain -3
The example will set the receive-side gain to -3 dB for the voice channel 10 on
the CMG card in slot 2.
{cmg_voice-addr}
In the form {slot:voip:port}
{gain}
Gain range is -14 to 14 dB. Default gain is 0 dB.
slot The slot number (1-6) that contains the CMG card.
voip To designate VoIP 1:1 is used.
channel Channel number for the router is 1-48, range or all