Black Box COMPACT T1 MT850A - Manual (Page 357)

Compact T1 - Release 6.1 5-273
CLI Commands
status
status (router) log
Use the status (router) log command to display the log of all CMG events. This command
applies to the CMG Router card only.
Syntax: status {cmg_card-addr} log
["profile-name"]
Example: status 5 log
> status 4 log
CMG LOG REPORT Slot-4
Date Time Event Type Trans ID Chan Event Description
------ ----------- ---------- --------- ---- ------------------
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.
["profile-name"]
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.