Assembly of unit, Assembly of unit -3 – Black Box COMPACT T1 MT850A User Manual
Page 45
Advertising
Compact T1 - Release 6.1
2-3
Physical
Installation
Assembly of Unit
Assembly of Unit
The cards should be positioned in the chassis as follows:
Note: Slots are labeled on the top and the bottom of the chassis.
l
Power Supply in the POWER Slot
l
T1 Controller in Slot A
l
Service Cards can be in any slot 1 through 6.
Note: When an Unit is mounted to the wall, cards that use the front cable
connections should be loaded from Slot 6 to 1. This will minimize card access
issues due to cable interference.
l
Always install blank faceplates in any unused slots.
Service Card Slots
1
2
3
4
5
6
A
POWER
Advertising