Delete (router) snmp community, Delete (router) snmp trap, Delete (router) snmp community -43 – Black Box COMPACT T1 MT850A User Manual
Page 127: Delete (router) snmp trap -43
Compact T1 - Release 6.1
5-43
CLI Commands
delete
delete (router) snmp community
Use the delete (router) snmp community command to delete an SNMP community entry on
the specified Router card.
Syntax:
delete {rtr_card-addr} snmp community
{"community-name"} {ip-addr}
Example:
delete 2 snmp community "commune" 192.168.100.245
The example will delete the previously added SNMP community named
"commune" from the Router in slot 2.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"community-name"}
The name of an existing community. This name must be enclosed in quotes, with a
maximum of 12 characters.
{ip-addr}
The IP address of the host that can access the SNMP agent via this community, in the form
of xxx.xxx.xxx.xxx, where xxx is between 0-255. The address "0.0.0.0" allows any host.
delete (router) snmp trap
Use the delete (router) snmp trap command to delete a trap destination from the specified
Router card.
Syntax:
delete {rtr_card-addr} snmp trap
{"community-name"} {ip-addr}
Example:
delete 2 snmp trap "commune" 192.168.100.245
The example will delete the previously added SNMP community named
"commune" from the Router in slot 2.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"community-name"}
The name of an existing community. This name must be enclosed in quotes, with a
maximum of 12 characters.
{ip-addr}
The IP address of the destination trap to delete, in the form of xxx.xxx.xxx.xxx, where xxx
is between 0-255.