Black Box COMPACT T1 MT850A - Manual (Page 308)

5-224 Compact T1 - Release 6.1
CLI Commands
show
show (router) mgcp algorithmname
The show (router) mgcp algorithmname command to display all MGCP designations for
voice coding algorithms supported by the CMG. This displays the CLI defined name, if any, and
the default for each algorithm. MGCP algorithm names are used in the "a:" attribute in the Local
Connection Options (L:) parameter line of a CRCX or MDCX command. This command
applies to the CMG Router card only.
Syntax: show {cmg_card-addr} mgcp algorithmname
Example: show 4 mgcp algorithmname
The example will show all MGCP names of voice coding algorithms supported
by the CMG card in slot 4.
> show 4 mgcp algorithmname
SLOT 4:
MGCP Voice Algorithm Names for CMG Local Connection Options
(LCO):
CMG Algorithm ID MGCP LCO Name
g711mu
g711a
g726_16
g726_24
g726_32
g726_40
{cmg_card-addr}
The slot number (1-6) that contains the CMG card.