Delete (router) dns proxy, Delete (router) remote, Delete (router) dns proxy -42 – Black Box COMPACT T1 MT850A User Manual
Page 126: Delete (router) remote -42
5-42
Compact T1 - Release 6.1
CLI Commands
delete
delete (router) dns proxy
Use the delete (router) dns proxy command to remove a remote DNS server address from the
specified Router card. If this command is directed to delete the only a DNS proxy server address
then DNS proxy is disabled.
Syntax:
delete {rtr_card-addr} dns proxy {ip-addr}
{"profile-name"}
Example:
delete 2 dns proxy 192.168.100.245 "Texas"
The example will delete a DNS proxy server address of 192.168.100.245 from
the Router in slot 2.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{ip-addr}
The IP address of the external DNS server, in the form of xxx.xxx.xxx.xxx, where xxx is
between 0-255.
{"profile-name"}
The profile name for the Router interface that is used to reach this destination. Name must
be enclosed in quotes, with a maximum length of 11 characters.
delete (router) remote
Use the delete (router) remote command to delete a remote WAN profile from the WAN
profile table on the specified Router card.
Syntax:
delete {rtr_card-addr} remote {"profile-name"}
Example:
delete 6 remote "Texas"
The example will delete a remote WAN named "Texas" from the WAN profile
table for the Router in slot 6.
{rtr_card-addr}
The slot number (1-6) that contains the Router (IP or CMG) card.
{"profile-name"}
The name of the remote WAN profile to delete. This name must be enclosed in quotes, with
a maximum of 12 characters.