Black Box COMPACT T1 MT850A - Manual (Page 173)

Compact T1 - Release 6.1 5-89
CLI Commands
set
set (ocudp) mvec
Use the set (ocudp) mvec to set Majority Vote Error Correction (MVEC).
Syntax: set {ocudp-addr} mvec {disable|enable}
Example: set 3:2 mvec enable
{ocudp-addr}
The {slot:port} address of the OCU-DP card you want to apply the changes to.
{disable|enable}
set (ocudp) secondary
Use the set (ocudp) secondary to configure the secondary channel service.
Syntax: set {ocudp-addr} secondary {disable|enable}
Example: set 3:2 secondary enable
{ocudp-addr}
The {slot:port} address of the OCU-DP card you want to apply the changes to.
{disable|enable}
slot Slot number (1-6) where the OCU-DP is located
port Port number or range.
disable* Disable the error correct (Default).
enable Enable the error correct
slot Slot number (1-6) where the OCU-DP is located
port Port number or range.
disable* Disable the secondary channel service (Default).
enable Enable the secondary channel service