Lenze EVS9332xS - Manual (Page 155)

Wiring of the standard device
Wiring of the feedback system
Resolver at X7
5
5.10
5.10.2
l
5.10−2 EDSVS9332S EN 6.0−07/2013
5.10.2 Resolver at X7
Field Values
Connection at drive controller Connector: Socket, 9−pole, Sub−D
Resolver type recommended Receiver
Number of pole pairs of the
resolver 1
Transmission ratio 0.3
Evaluation method Voltage impression in the sine and cosine winding
Max. output voltage ± 10 V
Max. current consumption 50 mA per winding
Max. impedance [Z] 500 W per winding
Output frequency 4 kHz
Monitoring Monitoring for open circuit of the resolver and the resolver
cable (configurable)
+REF
-REF
+COS
+SIN
-SIN
-COS
+KTY
-KTY
1
2
3
4
5
6
7
8
9
X7
< 50 m
KTY
9300STD331
Fig. 5.10−1 Resolver connection
Cores twisted in pairs
X7 − Resolver
Connector: Socket, 9−pole, Sub−D
Pin 1 2 3 4 5 6 7 8 9
Signal +REF −REF GND +COS −COS +SIN −SIN +KTY −KTY
0.5 mm 2
(AWG 20)
˘ 0.14 mm 2 (AWG 26)
Technical data
Wiring