Lenze EVS9332xS - Manual (Page 213)

Parameter setting
Parameter setting with the XT EMZ9371BC keypad
Display elements and function keys
7
7.2
7.2.3
l
7.2−4 EDSVS9332S EN 6.0−07/2013
4 Number
Active level Meaning Explanation
Menu level Menu number Display is only active for operation
with standard devices of the 8200
vector or 8200 motec series
Code level Four−digit code number
5 Number
Active level Meaning Explanation
Menu level Submenu number Display is only active for operation
with standard devices of the 8200
vector or 8200 motec series
Code level Two−digit subcode number
6 Parameter value
Parameter value with unit
7 Cursor
In the parameter level, the digit above the cursor can be directly changed
8 Function keys
For description see the following table
)
Note!
Shortcuts with
T:
Press and hold
T, then press the second key in addition.
Key Function
Menu level Code level Parameter level Operating level
V
Change to the
parameter level Change to the
operating level Change to the code
level
T V
Go to the
"Short setup"
menu and load
predefined
configurations
1)
Accept parameters
when SHPRG
p or
SHPRG is displayed
z
y
Change between
menu items Change of code
number Change of digit via
cursor
T z
T y
Quick change
between menu
items
Quick change of
code number Quick change of
digit via cursor
Z
Change between main menu, submenu
and code level
Cursor to the right
Y Cursor to the left
U Deactivate the function of the key S, the LED in the key goes off
S Inhibit the controller, the LED in the key is lit.
Reset fault
(TRIP−Reset): 1. Remove the cause of malfunction
2. Press
S
3. Press U
1) Only active for operation with standard devices of the 8200 vector or 8200 motec series
Function keys