Rockwell Automation 1772-L8_LW_LWP_LX_LXP,D17726.5.8 User Manual - Manual (Page 168)

Data Manipulation and
Comparison Instructions
Chapter 12
12-13
4. Press -(PUT)-.
5. Enter <address>.
Editing the Operation
Edit a Get Byte/Put instruction by performing the following steps.
1. Position the cursor over -[B]-.
2. Press -[B]-.
3. Enter <address>.
4. Enter <byte designation>.
Important: Repeat steps 2, 3 and 4 when using two Get Byte instructions.
5. Press -(PUT)-.
6. Enter <address>.