Rockwell Automation 1772-L8_LW_LWP_LX_LXP,D17726.5.8 User Manual - Manual (Page 368)

RECORD
DISPLAY
MR,n
RETURN
CTRL
@ %
G P 5
CTRL
@ $
G P 4
ESC ESC
ESC
Report Generation
Chapter 23
23-17
You can access graphic capability by executing the following keystrokes:
These lines appear in the lower left hand corner of the screen.
CHANNEL C: 9600 BAUD; INPUT = ON; HANDSHAKE = ON
RECORD
The previous messages disappear. The following messages appear in the
upper left hand corner of the screen.
SWITCH TO ALPHANUMERIC OVERLAY CONFIGURING
MESSAGE AREA CONFIGURATION COMPLETE, PLEASE
CONTINUE
If your message will contain graphics, change to the
Alphanumeric/Graphics Overlay (cat. no. 1770-KAB).
MS,n appears on a line underneath the previous message.
The letter n represents the number of any message from 1-64.
The message READY FOR INPUT appears underneath the line MS,n.
Turns on graphics capability.
You can enter your alphanumeric/graphic message.
Turns off graphics capability.
The message END OF MESSAGE STORE appears on the screen.
You have exited message generation.