Rockwell Automation 1772-L8_LW_LWP_LX_LXP,D17726.5.8 User Manual - Manual (Page 461)

Quick Reference
Appendix E
E-17
Alphanumeric/Graphic Key Definitions
Key Function
[LINE FEED] Moves the cursor down one line in the same column.
[RETURN] Returns the cursor to the beginning of the next line.
[RUB OUT] Deletes the last character or control code that was entered.
[REPT LOCK] Allows the next character that is pressed to be repeated continuously until
[REPT LOCK] is pressed again.
[SHIFT] Allows the next key pressed to be a shift character.
[SHIFT LOCK] Allows all subsequent keys pressed to be shift characters until [SHIFT] or
[SHIFT LOCK] is pressed.
[CTRL] Used as part of a key sequence to generate a control code.
[ESC] Terminates the present function.
[MODE SELECT] Terminates all functions and returns the mode select display to
the screen.
Blank Yellow Keys Space keys. Move the cursor one position to the right.
Industrial Terminal Control Codes
Control Code
Key Sequence
Function
[CTRL][P]
[Column #][;]
[Line #][A]
Positions the cursor at the specified column and line number [CTRL][P][A]
positions the cursor at the top left corner of the screen.
[CTRL][P][F] Moves the cursor one space to the right.
[CTRL][P][U] Moves the cursor one line up in the same column.
[CTRL][P][5][C] Turns cursor on.
[CTRL][P][4][C] Turns cursor off.
[CTRL][P][5][G] Turns on graphics capability.
[CTRL][P][4][G] Turns off graphics capability.
[CTRL][P][5][P] Turns Channel C outputs on.
[CTRL][P][4][P] Turns Channel C outputs off.
[CTRL][I] Horizontal tab that moves the cursor to the next preset 8th position.
[CTRL][K] Clears the screen from cursor position to end of screen and moves the
cursor to the top left corner of the screen.
Key Sequence Attribute
1
[CTRL][P][0][T] Attribute 0 = Normal Intensity
[CTRL][P][1][T] Attribute 1 = Underline
[CTRL][P][2][T] Attribute 2 = Intensify
[CTRL][P][3][T] Attribute 3 = Blinking
[CTRL][P][4][T] Attribute 4 = Reverse Video
Any three attributes can be used at one time using the following key sequence:
[CTRL][P][Attribute #][;][Attribute #][;][Attribute #][T]
1
Graphic Programming