Rockwell Automation 1772-L8_LW_LWP_LX_LXP,D17726.5.8 User Manual - Manual (Page 78)

Installing Your
Programmable Controller
Chapter 4
4-39
Figure 4.20
Top View of the ac Power Plug
17229
place tool here
insert wire here
Connecting a Power Supply
To connect the wires to the 1771-P3, -P4, or -P5 power supplies do
the following:
1. Strip 3/8 inch insulation from the end of the wire. Figure 4.21 shows
an ac powered 1771-P3 or -P4 power supply. Figure 4.22 shows a dc
powered 1771-P5 power supply.
2. Loosen each terminal screw and place the appropriate wire under it
(Figure 4.21).