Rockwell Automation 1797-OE8H FLEX Ex HART Analog Modules User Manual - Manual (Page 191)

Publication 1797-6.5.3 - March 2006
Index
A
alarms
1797-IE8 module 1-3
local fault 1-3, 1-6
overrange 1-3, 1-4
programming remote fault 1-6
remote fault 1-3, 1-5
underrange 1-3, 1-4
using fault mode with local fault
alarm 2-2
using fault mode with remote fault
alarm 2-2
using remote fault alarm to deter-
mine alarm levels 1-5
analog digital state
1797-OE8 module 2-8
analog fault state
1797-OE8 module 2-8
area classification
defining 6-2
hazard 6-2
method 6-2
temperature rating 6-2
B
bit descriptions
image table mapping 2-12
bit/word description
4 output/4 input module 2-17
C
calibration 5-1
periodic 5-2
tools 5-2
tools and equipment 5-2
communication fault behavior 4-8
ControlNet network 1-2, 4-2, 4-4
D
data format
1797-IE8 module 2-4
digital fault state
1797-OE8 module 2-8
drilling dimensions
wall/panel mount 3-8
E
entity parameters
1797-IE8 module A-3
1797-OE8 module A-11
European Union Directives
compliance to 3-2
EMC directive 3-2
Ex directive 3-2
F
fault mode
1797-IE8 module 2-2
enabling/disabling local fault alarm
2-2
enabling/disabling remote fault
alarm 2-2
functional and intrinsic safety
parameters
1797-IE8 module 6-4
H
high low error level
1797-IE8 module 2-3
I
idle state behavior 4-8
image table mapping 2-12
1797-IE8 bit/word descriptions 2-14
1797-IE8 module 2-13
1797-OE8 bit/word descriptions 2-17
1797-OE8 module 2-16
input filter cutoff
1797-IE8 module 2-3
installation 3-4
module 3-9
intrinsicsafety entity verification 6-6
K
keyswitch
using on the terminal base unit 3-9
L
latch retry mode
1797-OE8 module 2-7
local fault mode
1797-OE8 module 2-7
loop functionality verification 6-4