Rockwell Automation 1797-OE8H FLEX Ex HART Analog Modules User Manual - Manual (Page 54)

Publication 1797-6.5.3 - March 2006
3-2 How to Install Your FLEX Ex Analog Modules
Compliance to European
Union Directives If these products have the CE mark they are approved for installation within
the European Union and EEA regions. They have been designed and tested to
meet the following directives.
EMC Directive
These products are tested to meet the Council Directive 89/336/EC
Electromagnetic Compatibility (EMC) as amended by 92/31/EC and
93/68/EEC, by applying the following standards:
• EN61000-6-4:2001, Electromagnetic Compatibility (EMC) - Part 6-4:
Generic Standard for Industrial Environments (Class A)
• EN61000-6-2:2001, Electromagnetic Compatibility (EMC) - Part 6-2:
Generic Standards - Immunity for Industrial Environments
• EN61326-1997 + A1-A2, Electrical Equipment For Measurement,
Control, and Laboratory Use - Industrial EMC Requirements
ATEX Directive
These products are tested in conjunction with associated I/O modules to meet
the Council Directive 94/9/EC (ATEX) Equipment and Protective Systems
Intended for Use in Potentially Explosive Atmospheres by applying the
following standards:
• EN50014:1997 + A1-A2, Electrical Apparatus for Potentially Explosive
Atmospheres
• EN50020:1994, Electrical Apparatus for Potentially Explosive
Atmospheres - Intrinsic Safety “i”
• EN50284:1999, Special Requirements for Construction, Test and
Marking of Electrical Apparatus of Equipment Group II, Category 1G
• EN50281-1-1:1998 + A1, Electrical Apparatus for Use in the Presence
of Combustible Dust - Part 1-1: Protection by Enclosure