Rockwell Automation 1797-OE8H FLEX Ex HART Analog Modules User Manual - Manual (Page 77)

1 Publication 1797-6.5.3 - March 2006
Chapter
5
Calibrate Your Module
What This Chapter Contains Use this chapter to calibrate the FLEX Ex analog I/O modules.
In practice, you must use the I/O configuration portion of your programming
software to calibrate your modules. The software executes the methodology
explained here.
For See
When and How to Calibrate Your FLEX Ex
Analog I/O Module 5-2
Tools and Equipment 5-2
1797-IE8H Calibration Features 5-3
1797-IE8H Calibration Command Structure 5-4
1797-IE8H Calibration Command Byte 5-5
1797-IE8H Calibration Item Byte
Channel-Mask 5-8
1797-IE8H Calibration with Offset and Gain 5-11
1797-OE8H Calibration Features 5-12
1797-OE8H Calibration Command Byte 5-13
1797-OE8H Calibration Item Byte
Channel-Mask 5-19
1797-OE8H Calibration Flowchart Procedure 5-21
IMPORTANT
This chapter provides a detailed method to perform module
calibration with individual commands. This discussion is only
given here to explain the general process.