Rockwell Automation 1797-OE8H FLEX Ex HART Analog Modules User Manual - Manual (Page 90)

Publication 1797-6.5.3 - March 2006
5-14 Calibrate Your Module
Table 5.9 1797-OE8H Calibration Command List
Calibration Command (Decimal)
Bits 0…5 Function
0 Reserved
1 Calibration command min scale
2 Calibration command max scale
3 Write measured min scale value (Current, uA)
4 Write measured min scale value (Voltage, uV)
5 Write measured max scale value (Current, uA)
6 Write measured max scale value (Voltage, uV)
7 Reserved
8 Set all calibration values to default
9 Set one specified calibration value to default
10…13 Reserved (1)
14 Save calibration content to EEPROM
15…63 Reserved
(1) Used during manufacture of the product. Do not use.