Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 112
Advertising
112
Publication IASIMP-QS010B-EN-P - October 2009
Chapter 6 Add a PanelView Plus 600 Terminal
14. Right click your project and choose
Refresh All Folders.
17. Expand the controller shortcut and
select Online > Program: Main
Program.
18. Select Output_Light (the name of
your output used in ladder logic) and
click OK.
The Indicator tag is
populated.
19. Click OK.
13. On the Connections tab, click
... under Tag.
Advertising